Aluminum sheet specifications

[Brand] Aluminum sheet specifications
[State] O, H32, H34, H36, H38, H111, H112
[Classification] Insulation aluminum coil, pipeline insulation aluminum coil
[Thickness] 0.02mm – 12.00mm
[Width] 20mm – 2600mm
[Length] 20mm – 8000mm
[Surface treatment] Single-sided or double-sided lamination, paper addition, and other additional aluminum sheet processes
[Technical parameters] 90-degree bending without cracking, pipeline insulation material
[Packaging] Simple package, three-layer moisture-proof fine package, logistics packaging, foreign trade shipping packaging [fumigation wooden pallet]
[Transportation] Self-pickup, logistics, tax-inclusive delivery
[Aluminum sheet specification density] 2.71/m2
[Aluminum sheet specification use] Construction, insulation, equipment housing, mechanical structure

Introduction to aluminum sheet specifications and models
As the application volume of the pipeline insulation industry market is gradually increasing, aluminum sheets are increasingly appearing in our lives. Whether it is used on external insulation pipe materials or on roof colored steel tiles. At the beginning, many friends chose to use insulation aluminum to replace the steel or other used before. Especially the 0.5mm thickness insulation aluminum of 1060 aluminum alloy and the 0.5mm thickness of 3003 alloy that we will talk about next.

1060 alloy 0.5mm thickness aluminum material: The most frequently used aluminum plate specification is 1060 alloy 0.5mm thickness aluminum, because it is in the pipeline insulation industry. Its thickness is more suitable, and 1060 has a higher aluminum content, lower density, and better corrosion resistance. Therefore, the weight of one square is relatively small. According to our theory and calculation, one ton of 0.5mm thickness insulation aluminum can produce about 750 square meters. Therefore, in different environments, its wrapping area is larger, the material cost is lower, and the parameters seem to be more optimistic. Usually, a roll of 0.5mm thick insulation aluminum skin weighs about three tons, but different traders adopt different methods, which may have ** errors.

3003 alloy 0.5mm thickness aluminum skin material: 3003 alloy is an aluminum plate alloy. Customers who use insulation aluminum skin all year round are not very familiar with its parameters, models and specifications, but they all know that 3003 alloy has a high manganese content and better corrosion resistance than 1060 aluminum alloy. So parameters cannot represent everything, 3003 alloy vs. 106 aluminum alloy. The hardness is higher, but it is not as commonly used as 1060. In the pipeline insulation industry, it is generally used in humid environments or at the seaside. In this environment, the life of 3003 aluminum skin is much better than 1060.

Aluminum skin specifications corresponding to the use of different thicknesses, different specifications, naturally the use of thermal insulation aluminum skin is different. For example, 0.5mm thick aluminum foil is generally used in pipe insulation industry, aluminum-plastic panel industry, external insulation pipe industry, and various pipe wrapping industries. However, 0.6mm or 0.8mm thick aluminum foil is more commonly used in roofing industry and tile pressing industry.