Hot rolled deformed steel bars rebar for structural material

Hot rolled deformed steel bars rebar for structural material
Hot-rolled steel bars are finished steel bars that have been hot-rolled and naturally cooled. They are made of low-carbon steel and ordinary alloy steel at high temperature. They are mainly used for reinforcement of reinforced concrete and prestressed concrete structures. One of the most widely used steel varieties. Most of the steel bars with a diameter of 6.5-9 mm are rolled into wire rods; those with a diameter of 10-40 mm are generally straight bars with a length of 6-12 M. Hot-rolled steel bars should have a certain strength, namely yield point and tensile strength, which is the main basis for structural design. There are two types of hot-rolled round steel bars and hot-rolled ribbed steel bars.

High-quality carbon steel hot-rolled wire rod can be used for processing steel nails, pins, steel wire ropes, steel cables, steel strands, hose steel wires, spring steel wires, etc. and excellent drawing performance.
USE:
Category 1Medium and high carbon hard wire

- Grade 35 45 60 65 70 85

The chemical composition is uniform, the performance of the strip is stable; the dimensional accuracy is high, the surface quality is good; the structure is uniform, the content of inclusions is low, the grain size is moderate, and the drawing performance is good.

Category 2 Steel for prestressed wire rope and strand

Grade SWRH77B SWRH82B SWRH77BCr SWRH82BCr

Stable performance, excellent plasticity and ductility; high dimensional accuracy, good surface quality; chemical composition, release

The carbon layer and inclusions are strictly controlled and the structure is uniform.


Post time: Dec-08-2022