-
High quality carbon hot rolled round bar
Size:6mm-22mm
Length:6m/9m/12m standard length
-
Hot dipped Steel Zinc Coated Galvanized Steel Coil Corrugated Sheet
Color-coated coils are based on hot-dip galvanized sheet, hot-dip galvanized sheet, electro-galvanized sheet, etc. After surface pretreatment (chemical degreasing and chemical conversion treatment), one or several layers of organic coatings are applied on the surface, and then A product that has been cured by baking.
The color-coated steel strip using hot-dip galvanized steel strip as the base material is protected by the zinc layer, and the organic coating on the zinc layer plays a covering and protective role to prevent the steel strip from rusting, and the service life is longer than that of the galvanized strip, about 1.5 times.
-
High hardness deep drawing Cold-rolled steel sheet
Thickness is 0.1-8mm
Width is 600-2 000mm
The length of the steel plate is 1 200-6 000mm
Grades: Q195A-Q235A, Q195AF-Q235AF, Q295A(B)-Q345 A(B); SPCC, SPCD, SPCE, ST12-15; DC01-06 DC01-DC06 CR220IF HC340LA 590DP 220P1 CR220BH CR42 DC01-DC06 SPCC-J1 SPCC-J2 SPCD SPCE TYH THD SPCC-SC TLA SPCC DC01
-
PPGI Color coated galvanized roofing corrugated sheet
Thickness:0.1-3mm
Corrugated board tile type:660 750 840 850 900 950/YX25-205-820/ YX10-130-910
-
PPGI prepainted RAL galvanized gi color coated steel coil
Thisckness:The thickness of the back paint film is 5-10um, and the thickness of the front paint film is 15-20um. The thickness of the imported color-coated board is expressed as 0.276, 0.326, 0.376, 0.426, 0.476, 0.526, 0.576, and the domestic color coating is from 0.1 to any below 2.0. Specifications have
Width:600-2000mm
Material:HC400/450CPD+AZ HC450/500CPD+AZ HC500/550CPD+AZ HC550/600CPD+AZ HC350/550DPD+AZ HC400/650DPD+AZ TS280GD TS350G CQ HSS
-
Hot dipped zinc coated galvanized steel sheet
Thickness: 0.1-10mm
Width: 500-2500mm
Zinc coated:Z30-Z300G
Material: HC340LAD+Z HC340LAD+Z HC220BD+ZDX54D-DX56D+Z
HC220BD+Z DX54D-DX56D+Z DX51D+Z-MD DX51D+Z-HR GB/T2518-2008 EN 10327-2004DX52D-DX53D+Z
SGH340 SGC340 SGH440 JIS G3302-2010 Q/HG007-2016GB/T2518-2008 S350GD+Z S550GD+Z SGCC DX51D+Z Q/HG007-2016 GB/T2518-2008
-
Prime Hot dip Galvanized steel strip coil
Thickness:0.15mm-3mm
Width:18mm-600mm
Zinc:20-40g
Material:SGCC/DC51D/SPCC
-
Hot rolled galvanized iron steel corrugated roofing sheet
Thickness:0.12mm~5.8mm
Width:600-1500mm
Material:SGCC/DX51D/BWG34
Profiled steel plate 460 470 750 780 820 840 900 1050 850 880 960 980wave,canbe customize.
-
Hot rolled miedum thickness steel boiler plate
Thickness:4.5mm-300mm
Width:600-2000mm
Material:Q355B,Q345R,16MNDR,1Cr6Si2Mo,SA516Gr70,16Mo3,16Mo3,Q340NH12Cr1MoV,etc
(1) The main steel grades of boiler plates are: 20g, 16Mng, 15CrMoVg, 19Mng, 22Mng
(2) The main steel grades of plates for pressure vessels are: 20R, 16MnR, 15MnNbR, 15MnVNR
(3) Executive standards: GB713-1997, GB6654-1996
-
HRC Carbon Metal Hot Rolled Iron Black Steel Coil
For galvanized coils, the sheet steel is immersed in a molten zinc bath to make a sheet of zinc coated on its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in a plating tank with zinc melted to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also manufactured by hot dip method, but immediately after being out of the tank, it is heated to about 500 ℃ to form an alloy coating of zinc and iron.
-
S355JR/ Q345 Carbon Metal Hot Rolled Iron Black Steel Coil
Manufacturing plant, general construction and various construction machinery, such as drilling rigs, electric shovels, electric wheel dump trucks, mining vehicles, excavators, loaders, bulldozers, various cranes, coal mine hydraulic supports, etc. Machinery and other structural parts. Highway and railway bridges (including sea-crossing bridges) for the production of riveted and bolted structures.
-
Steel Coil
Steel coil, also known as coil steel. The steel is hot-pressed and cold-pressed into rolls. In order to facilitate storage and transportation, it is convenient to carry out various processing (such as processing into steel plates, steel strips, etc.) The hot steel strip from the last rolling mill of finishing rolling is cooled to the set temperature by laminar flow, and is rolled into steel strips by the coiler. Coils, cooled steel strip coils, according to the different needs of users, through different finishing lines (leveling, straightening, cross-cutting or slitting, inspection, weighing, packaging and marking, etc.) Coiled and slit steel strip products.